General
This installation manual is written for people who are involved with the preparation, installation and configuring the PaSS gateway system in the parking facility.
During the preparation phase of the project, the physical components and installation are defined is defined.(Rack, cameras, displays, cabling plan ...)
During the installation phase everything will be physically installed. An external party will most often mount the devices and install the required cabling. A Qpark or PMS technical person will connect the different features, such as "barrier open" , loop detectors etc, to the IO controllerl in the gate way rack.
During the configuration phase, the installation will be checked and accepted. The rack will be powered and the system will be configured with the correct configuration files. Also the cameras will be adjusted. Displays are loaded with the correct application and configured with the correct IP. At the end of the configuration the system is operational and ready to be put in service.
